Atdec Telehook TH-PS-S Installation manual Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Projektoren Atdec Telehook TH-PS-S Installation manual herunter. Atdec Telehook TH-PS-S Installation manual User Manual [fr] Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 3
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
TH-PS-S
Component Checklist
Short throw projector wall mount | Single Stud
Support Arm
! IMPORTANT - Install Telehook Short Throw Projector Mount as per installation instruction.
! This product supports a maximum load of 25kg (55lbs.).
! The manufacturer accepts no responsibility for incorrect installation.
IMPORTANT INFORMATION:
Step 1. Check Components
Check you have received against the component checklist and hardware above.
Wall Plate
HARDWARE
Coach Screw
(x4)
Nylon
Anchor (x4)
Washer (x4)
3mm Security
Allen Key
Security Screw (x2)
Tools Required:
Power Drill
6mm(0.23”) Drill Bit
12mm(0.47”) Masonry Drill Bit
13mm (0.5”) Socket Wrench Shifter
Phillips Head Screwdriver
3.1. Remove screw from End Cap and slide End Cap off
3.2. Loosen screws on Sliding Pole Mount and slide the entire assembly off
3.3. Slide off Base Cover
3.4. Slide the Cable Cover out
Step 3. Remove End Cap, Sliding Pole Mount, Base Cover and Cable Cover from Support Arm
Cable Cover Base Cover Sliding Pole Mount End Cap
Step 2. Mounting Wall Plate
Masonary Timber Stud
Coach Screw
Coach Screw
Washer
Washer
Ø12mm x 65mm deep
Drilled Hole
Ø6mm x 65mm deep
Drilled Hole
Nylon Anchor
IMPORTANT! Any structural elements must be capable of supporting the combined weight of
all the equipment and devices being mounted. If in doubt, consult a structural engineer.
TIP: Use Mount as a drilling template.
Installation Instructions
TH-PF
Pro AV Projector Mount
Seitenansicht 0
1 2 3

Inhaltsverzeichnis

Seite 1 - Installation Instructions

TH-PS-SComponent ChecklistShort throw projector wall mount | Single StudSupport Arm! IMPORTANT - Install Telehook Short Throw Projector Mount as per

Seite 2

Slide the hook on the Support Arm over the top bolts on the Wall Plate.Swing the Support Arm down so the bottom slots slide over the bottom bolts.Brea

Seite 3 - Option B

Step 5. Re-Attach Covers and Cable Cover (Cont..)Step 6. Attach Projector MountOption AOption BRe-mount the Sliding Pole Mount with the cable fitted e

Kommentare zu diesen Handbüchern

Keine Kommentare