Atdec Telehook TH-PF Installation manual Bedienungsanleitung PDF herunterladen

M2.5x15mm w/ Washer

M3x15/20mm w/ Washer

TH-PF

Component Checklist

Pro AV Projector Ceiling Mount

Square Nut (x4)

Leg (x4)

Coach Bolt (x4)

Nylon

Anchor (x4)

HARDWARE

Projector Mounting Screws (x4 each)

M4x15/20/25mm

M5x15/20/25mm

M6x15/20/25mm

Tools Required:

• Power Drill

• 4mm(0.15”) Drill Bit

• 9mm(0.35”) Masonry Drill Bit

• Phillips Head Screwdriver

• 13mm (0.5”) Socket Wrench/ Shifter

! IMPORTANT - Install Telehook Projector Ceiling Mount as per installation instruction.

! This product supports a maximum load of 25kg (55lbs.).

! The manufacturer accepts no responsibility for incorrect installation.

IMPORTANT INFORMATION:

Step 1. Check Components

Check you have received against the component checklist and hardware above.

M6 Washer (x4)

Mount

Step 2. Cable Management

Step 4. Ceiling Mount

Base Plate

10mm Spacer

(x4 each)

M5x10mm Socket

Head Screw (x4)

M5x10mm

Security Screw

3mm Security

Allen Key

Security Cap (x4)

The TH-PF can be mounted flush to a ceiling (Step 4) or to a pole (Step 5).

Before mounting your TH-PF, give consideration to your cable route. The

TH-PF has provision for cable management as shown below.

Step 3. Choosing Orientation

Ensure the Mount is attached with the Projector Marks pointing in the same

direction that the projector will be facing.

Projector Mark

IMPORTANT! Any structural elements must be capable of supporting the combined weight of

all the equipment and devices being mounted. If in doubt, consult a structural engineer.

Timber Stud Masonry

Coach Bolt

M6 Washer

Mount

TIP: Use Mount as a drilling template.

Coach Bolt

M6 Washer

Mount

Ø9mm x 40mm deep

Drilled Hole

Ø4mm x 35mm deep

Drilled Hole

Installation Instructions

1 2 3 4 5

Inhaltsverzeichnis

Seite 1 - Installation Instructions

M2.5x15mm w/ WasherM3x15/20mm w/ WasherTH-PFComponent ChecklistPro AV Projector Ceiling MountSquare Nut (x4)Leg (x4)Coach Bolt (x4)NylonAnchor (x4)HAR

Seite 2 - Step 6. Mounting Projector

Step 5. Pole MountNote: The TH-PF is compatible with 1.5NPT thread. A range of Pole Accessories are available from Atdec.1. Install Pole Accessory.2.

Seite 3 - Step 8. Height Adjustment

Step 8. Height AdjustmentStep 9. Insert Security Caps Step 10. Insert Square NutsSecurity CapInsert Security Cap and tighten using the supplied 3mm Se

Seite 4 - Step 14. Security

Step 13. cont.Step 14. SecurityStep 13. Attach Projector to Mount2 ROTATEKeyholesInsert the four studs to the key holes and Rotate the projector.To s

Seite 5 - Step 16. Tilt Adjustment

Installation CompleteNo portion of this document or any artwork contained herein should be reproduced in any way without the express written consent o

Kommentare zu diesen Handbüchern

Keine Kommentare

Atdec Telehook TH-PF Installation manual Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Projektoren Atdec Telehook TH-PF Installation manual herunter. Atdec Telehook TH-PF Installation manual User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Atdec Telehook TH-PF Installation manual