Atdec Telehook TH-PS-D Installation manual Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Projektoren Atdec Telehook TH-PS-D Installation manual herunter. Atdec Telehook TH-PS-D Installation manual User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 3
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Step 2. Position Central Connector
Select the position of the Central
Connector before mounting the
Wall Plate to the wall.
TH-PS-D
Component Checklist
Short Throw Projector Wall Mount | Dual Stud
Support Arm
! IMPORTANT - Install Telehook Short Throw Projector Mount as per installation instruction.
! This product supports a maximum load of 25kg (55lbs.).
! The manufacturer accepts no responsibility for incorrect installation.
IMPORTANT INFORMATION:
Step 1. Check Components
Check you have received against the component checklist and hardware above.
Wall Plate
End Covers
Extrusions
HARDWARE
Coach Screw
(x6)
Nylon
Anchor (x6)
Washer (x6)
3mm Security
Allen Key
Security Screw (x2)
Tools Required:
Power Drill
6mm(0.23”) Drill Bit
12mm(0.47”) Masonry Drill Bit
13mm (0.5”) Socket Wrench Shifter
Phillips Head Screwdriver
Step 3. Mounting Wall Plate
Masonary Timber Stud
Coach Screw
Coach Screw
Washer
Washer
Ø12mm x 65mm deep
Drilled Hole
Ø6mm x 65mm deep
Drilled Hole
Nylon Anchor
IMPORTANT! Any structural elements must be capable of supporting the combined weight of
all the equipment and devices being mounted. If in doubt, consult a structural engineer.
TIP: Use Mount as a drilling template.
Installation Instructions
Seitenansicht 0
1 2 3

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Step 2. Position Central Connector Select the position of the Central Connector before mounting the Wall Plate to the wall.TH-PS-DComponent ChecklistS

Seite 2

Slide the hook on the Support Arm over the top bolts on the Wall Plate.Swing the Support Arm down so the bottom slots slide over the bottom bolts.The

Seite 3 - Option B

Break the Base Cover tab on the side to allow the cable to exit through slot.Secure the Base Cover with the corresponding Security Screws.Insert cable

Kommentare zu diesen Handbüchern

Keine Kommentare